1. Remove cable jacket, cut 2/3 of cable braid and foil for 4 pair wires. Next, Arrange 4 pair wires according to EIA/TIA 568A or 568B wiring schemes. Then, cut the wires in an oblique angle and insert the wires into loading bar and then cut the balance wires as below.
2. After the step above, assemble the plug, arrange the ground wire in the middle, and cut the spare ground wire off. After that, crimp the plug by hand tool or crimping machine. Finally, do the molding after crimping the plug, which lets the appearance of patch cord elegant and provides the protection to the patch cord.